SPD C2 385V Lightning Protection System Power Surge Arrester For Transmission Equipment
|
|
Overview The EPL series cable lightning arresters are designed to protect transmission equipment connected by twisted pair wires from atmospheric or operational overvoltages and are suitable for communication systems, computer systems and automatic control systems. It not only provides multi-level fine protection with low residual voltage between twisted pairs, but also provides high-energy common mode protection to ground for twisted pairs. ● It adopts multi-stage protection circuit and the core components are selected from international **** with stable performance. ● With large through-current capacity, low signal port clamp voltage, low insertion loss, sensitive response, and transmission signal frequency up to 2MHz. ● Easy installation, no special maintenance, long service life, etc.
Technical parameters Product Model EPL-120 Rated working voltage Un 120V **** Continuous working withstand voltage Uc 150V Rated working current In 300mA SPD test category C2 Nominal discharge current Isc (8/20μs): symmetrical/asymmetrical
(PE) 12.5A/5kA Voltage protection class Up: symmetrical/asymmetrical (PE) 240V/0.6kV Operating frequency ≤2.0MHz Insertion loss ≤3dB Dimension 18mm×90mm×58mm Connection method Wired Working environment conditions Temperature range: -40℃~+70℃. Humidity range. 30%~85% (25℃)
Precautions after installation 1,External signal wires (2 wires) are connected to the "line" end and 2 signal wires are led from the "device" end to the protected device end. 2, the ground wire and PE line is reliably connected.
Caution 1,This product is only suitable for indoor use. 2,Do not install in thunderstorm. |
| Product Tags: SPD C2 Lightning Protection System 385V power surge arrester SPD C2 power surge arrester |
|
50KV/M RS485 Lightning Protection Electric Field Meter System |
|
3 Phase Lightning Arrester Din Rail Mounted IEC Standard For Spd Protection |
|
Metal 11KV Lightning Arrester Din Rail Mounted For Spd Protection |
|
Din Rail Mounted Lightning Surge Arrester Customized 3-220kV For Spd Protection |
|
3 Phase Lightning Arrester Din Rail Mounted IEC Standard For Spd Protection |
|
Spd Protection Zinc Oxide Lightning Arrester Din Rail Mounted |