C17510 Round Rod / Plate / Disc With High Tensile Strength For Industrial Applications

Chemistry of C17510 Material:

Avalibale Standard of C17510 Material:

C17510 is a higher conductivity, lower hardness beryllium copper alloy.

Available Form for C17510 Material:

Performance Attributes of C17510 Material:

Material C17510 is a supersaturated solid solution copper-based alloy, which is a non-ferrous alloy with good combination of mechanical properties, physical properties, chemical properties and corrosion resistance.  

After solid solution and aging treatment, C17510 has high strength limit, elastic limit, yield limit and fatigue limit equivalent to special steel; at the same time, it has high electrical conductivity , thermal conductivity, high hardness and resistance, high creep resistance and corrosion resistance.

Typical Properties of C17510 Material:

Performance of C17510 Material:

1. Moderate in strength
2. Provides the best conductivity of all materials
3. Strength higher than aluminium
4. Can be used as a total mold system or as an insert into other system mold

Product Photo of C17510 material:

Application of C17510 Material:

• Molds for low gravity die-casting
• Electrical components
• Resistance welding eletrodes
• Seam weldings wheels
• Mold for plastic injection
• Plunger tips for aluminium die-casting
• Circuit breaker switches

Other Material Grades provided by Cuberyllium:

C17200 beryllium copper alloy

--Available form: rod, bar, strip, sheet, plate, tube, wire

C17300 beryllium copper alloy

--Available form: rod

C17500 beryllium copper alloy

--Available form: rod, plate

Qbe2.0 beryllium copper alloy

--Available form: rod, bar, strip, sheet, plate, tube, wire

Qbe1.9 beryllium copper alloy

----Available form:strip

FAQ:

Q1:What’s the advantages the Beryllium Copper of CUBERYLLIUM®?

A1: 1: The Biggest Coil weight could be reach 1200kg/Coil

2:We are the only one who melting by Vacuum semi-Continuous Furnace.

3:Surface further polishing for top clients.

Q2: How about your payment terms?
A2: Generally, 30% as deposit by T/T, then 70% should be paid before the delivery.

Q3: Why you melting by Vacuum semi-Continuous Furnace?
A3:Could be get the Cast ingot without gas,smaller segregation, Grain Refinement

Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the amount is different.