Metallized Electrical Ceramic Components Seal Rings Alumina Washers

Browse Categories

Loudi Antaeus Electronic Ceramic Co.,Ltd.

City: loudi

Province/State:hunan

Country/Region:china

Tel:86--15073852630

Contact Person:
Ms.Yan Lee View Contact Details

Metallized Electrical Ceramic Components Seal Rings Alumina Washers

Brand Name	Antaeus
Model Number	AD-B023
Certification	/
Place of Origin	Hunan,China
Minimum Order Quantity	Negotiation
Price	Negotiation
Payment Terms	T/T or Negotiation
Supply Ability	Full Supply
Delivery Time	15-45 days
Packaging Details	Inner vacuum packaging, outside carton.
Product Name	Metallized Alumina Ceramic Rings / Ceramic Insulators for Battery
Material	Alumina (Aluminum Oxide, Al2O3)
Insulation Resistance	1000M Ω（1000VDC)
High Light	Alumina Ceramic Rings / Metallized Ceramic Insulators / Electrical Ceramic Components
Thermal Shock Resistance room temperature to 850C	will not burst or leak after five operations
Max. Use Temp.	1650℃
ROHS Hardness	≥89
Flexural strength	550 Mpa(psix10^3)
Compressive Strength	2600(377) Mpa(psix10^3)
Coefficient of thermal expansion	8.2 X10^-6/℃
Coefficient of thermal conductivity	17-30.4 W/m.K

Detailed Product Description

Alumina Seal Ceramic Rings / Industry Insulation Rings

1. Description:

Energy-saving advantages of alumina ceramics on heating components

High temperature co-fired alumina ceramic heating sheet, namely metal ceramics heater(hereinafter referred to as:MCH) uses high-temperature co-fired multilayer ceramic technology to print the heating resistor paste on the cast ceramic green body according to the design requirements of the heating circuit, and then multi-layers are combined and fired into a whole, so as to have corrosion resistance, high temperature resistance and longevity It has the advantages of long, high efficiency and energy saving, uniform temperature, good heat conduction, and fast thermal compensation. It does not contain harmful substances such as lead, mercury, and hexavalent chromium, and fully meets the EU environmental protection requirements.

2. Feature Advantages:

1) Refractory, High Temperature Resistance, Maximum Used Temperature: 1800 ºC (3272ºF)
2) Hardness Strength, Wear Resistance Up To Mohz 9.0 ; HRA 80-90
3) High Voltage, Good Insulation Performance ,Electrical Resistivity Up To 10∧14 Ohm.Cm
4) High Polished Surface Up To Rz0.8(Ra0.1)
5) Superior Mechanical Strength, MAX 10 MPa.m1/2 Fracture toughness
6) Pressure Resistance, Max 2300MPa compressive strength
7) Anti-High Corrosion Resistance, Such As Acid Alkali Resistance
8) Long Service Life
9) Other excellent property

3. Material Features / Properties:

Composite	(wt %)	99%	99.5%	99.8%
Color		White or Ivory	White or Ivory	White or Ivory
Density	g/cm 3	3.82	3.9	3.92
Hardness	HRA	83	85	85
Flexural Strength	Mpa (psi*10 3 )	375	386	381

4. Technical Parameters:

Technical Parameters of Ceramics
Items	Test Conditions	Unit or Symbol	99% AL2O3	95% AL2O3	90% AL2O3	Zirconia	Steatite	Silicon Carbide
Volume Density	--	g/cm3	≥3.70	≥3.62	≥3.40	≥5.90	≥2.60	≥3.08
Tightness	--	Pa·m³/s	≤1.0×10-11	≤1.0×10-11	≤1.0×10-11	-	-	-
Liquid Permeability	--	--	Pass	Pass	Pass		Pass	-
Flexural Strength	-	MPa	≥300	≥280	≥230	≥1100	≥120	≥400
Elastic Modulus	-	GPa	-	≥280	≥250	≥220	-	400
Poisson Ratio	-	-	-	0.20～0.25	0.20～0.25	-	-	-
Thermal Shock Resistance	800℃( Room Temperature) Cycle: 10 times		Pass	Pass	Pass	-	-	-
Coefficient of Linear Expansion	20℃～100℃	×10-6 K-1	-	-	-		≤8	-
	20℃～500℃	×10-6 K-1	6.5～7.5	6.5～7.5	6.5～7.5	6.5～11.2	-	-
	20℃～800℃	×10-6 K-1	6.5～8.0	6.5～8.0	6.3～7.3		-	4
	20℃～1200℃	×10-6 K-1	-	7.0～8.5	-	-	-	-
Coefficient of Thermal Conductivity	20℃	W/(m·k)	-	-	-	-	-	90～110
Coefficient of Thermal Conductivity	1000℃	W/(m·k)	-	-	-	-	-	90～110
Dielectric Constant	1MHz 20℃	-	9.0～10.5	9.0～10	9.0～10	-	≤7.5	-
	1MHz 50℃	-	-	9.0～10	-	-	-	-
	10GHz 20℃	-	9.0～10.5	9.0～10	9.0～10	-	-	-
Volume Resistivity	100℃	Ω·cm	≥1.0×1013	≥1.0×1013	≥1.0×1013	-	≥1.0×1012	-
	300℃		≥1.0×1013	≥1.0×1010	≥1.0×1013	-	-	-
	500℃		≥1.0×109	≥1.0×108	--	-	-	-
Disruptive Strength	D.C	kV/mm	≥17	≥15	≥15	-	≥20	-
Chemical Durability	1:9HCl	mg/c㎡	≤0.7	≤7.0	-	-	-	-
Chemical Durability	10%NaOH	mg/c㎡	≤0.1	≤0.2	-	--	-	-
Grain Size	-	μm	-	3~12	-	-	-	-

5. Process Flows:

Formulating --- Granulating --- Forming --- Sintering --- Grinding --- Printing --- Nickel Plating --- Assembing --- Brazing --- Inspecting --- Packing

6. Production Facilities: Prilling Tower , Forming Machine , High Temperature Sintering Kiln

7. Detection Devices:

Electric Performance Tester , Film Thickness Analyzer , Granulometer , Helium Mass Spectrometer Leak Detector , Universal Pull Force Meter

8. Our advantages: Quality Assurance ; Price Competitive ; Factory Supply Directly ; Good Service

9. Shipping and Package:

10. Our aimed market:

Notes:Above information only for reference and please contact with us for more details freely when you have any inquiry!

Product Tags: Metallized Electrical Ceramic Components Seal Rings Electrical Ceramic Components Metallized Alumina Washers

Related Products

Advanced Engineering Ceramics China Precision Ceramic Machining Ring for sale


From:	Enter your Email please. Your email is incorrect!
To:	Loudi Antaeus Electronic Ceramic Co.,Ltd.
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

Metallized Electrical Ceramic Components Seal Rings Alumina Washers

Metallized Electrical Ceramic Components Seal Rings Alumina Washers

Advanced Engineering Ceramics China Precision Ceramic Machining Ring

Metallized Electrical Ceramic Components Seal Rings Alumina Washers

Corrosion Resistant Alumina Ceramic Rings High Performance ISO9001

Custom 96% Alumina Ceramics To Metal Sealed Parts For Power Battery Electrodes Of Electric Vehicles EV

Customization High Weldability Ceramic Sealing Plate Gasket For BYD New Energy Vehicles

Metallized Alumina Ceramic Gasket Washer Ring Sealed Connector For BYD Power Batteries