Bus Paint Baking Room CE Standard Truck Spray Booth Top
manufacturer in China BZB-BF20
Appilication:
This is one kind of our Big spray booth for big Bus/Truck.We can
accept different kind of customied and
can give Professional solution for customer.
Specification for 20m Big bus Paint Booth
| Inner dimension | 20000×5000×5000 mm(L×W×H) | | External dimension | 20146×6896×5600 mm(L×W×H) | | Air return style | Full down draft. 2 rows trench on the floor for air return. Single
row trench size:13000×840 mm(L×W). The trenches are covered by
galvanized steel grids. | | Main door | 1set, Single open door, four door leafs, Dimension:4000×4500
mm(W×H), with aluminum alloy frames and 5mm thick tempering glass
windows. Big Aluminum hinges. | | Personal door | 3 sets on side, single dimension: 700×2000mm(W×H), with pressure
locks and tempering glass windows. | | Body Wallboards | Body wallboards are 75mm thickness EPS panels double face with
0.426mm color steel skin. Tongue & Groove Style. | | Roof panel | Roof panels are 0.8mm galvanized steel plates bended making. | | Lights | Ceiling light: 28groups x 4pcs=72pcs
Side light: 30 groups x 2pcs=28 pcs
All lamps are 18W led lamps, with PAK brand one for two ballast.
Light strength≥800 Lux.
Light box is made of galvanized steel plates bending and surface
powder sprayed. Good quality. | | Power unit cabinets | Whole spray booth adopt two groups power unit. Per power unit have
2sets air intake fans and 1set exhaust fan.
Power unit cabinets are made of sprayed steel structures, double
layer galvanized steel covers and inside filled by rock wool
protection materials. Good sealing and low noise. | | Air intake and exhaust fans | Total have 4 sets intake fans, Single model: Double big holes
centrifuge YDW5.6S fan, power: 7.5kw. capacity: 21000m3/h. Total air intake capacity: 126000 m3/h. | | Total have 3 sets exhaust fans. Single model: DKF, power:15kw,
capacity: 36000m3/h, belt drive. Total air exhaust capacity: 108000m3/h | | Exhaust ducts | Ducts are made of 0.8mm galvanized steel plates with die flanges.
Quantities: 8M straight ducts and two 90degree elbows. | Heating system
| Total adopt 3 sets Original Italy Riello RG5S diesel burner, Total
heating capacity: 780000Kcal/h.
2mm thick SUS304 stainless steel making heat exchanger, double
layer heating fins, argon arc welding, equipped explosion-proof
vent. | | Filters | Muti-layer filtering Structure. Air intake entrance have primary
filter. Ceiling have high efficient filter blocks. Floor under
grids have fiber glass filters. Exhaust cabinet have two layers
fiber glass filters and one layer active carbon for paint smell.
The primary filter can capture granules larger than 10 μm. Ceiling
filter capture granules bigger than 4μm. The whole purification
system has capacity of large volume of dust. It’s filtering rate
reaches 98%. TSP≤1.4mg/m³. Ceiling filter meshes adopt C style
structure, change filter more easily. | | Electric control | Adopt turning buttons style control box, Main components are
Siemens or Schneider brand. With Light Switch, normal spray switch,
constant temperature spray switch. Baking Switch, Emergency Stop,
Breakdown Alarm, time adding, time and temperature set switch and
so on. | | Support power | 220V single phase for lights. Three phase, 380V, 50Hz | | Max working temperature. | 80℃ | | Air flow speed | ≥0.3m/s (no loading) | | Total power | 100KW |
About Us:
JingzhongJing(JZJ) Group company was set up in 1999,now is a large
comprehensive company which
specialies in the design,manufacture,sales,service for
Pre-treatment,Painting lines and Exhaust Gas
treatment equipments.
Main Product:
Spray booth/Preparation room/Water testing line for
Car/Bus/Truck/Train/Boat/aircraft ect;Sand Blasting
Room/Shot Blasting Room/Power Coating/Painting line,Exhaust
gas(Vocs treatment equipment for all kind
of Industry Product ect.
Two Produce Base:
China South Produce Base (In Guangzhou,Since 1999)
China North Produce Base (Jiangsu,Since 2007)
Some of our Project.
----------------------------------------FAQs-----------------------------------------
Are you Trade company or manufacturer?
We are the manufacturer with export liscence.We have two factory in
Guangzhou and in Jiangsu,China.
How can we cooperation?
How can we cooperation?
1. Turn Key Project:
Our company will be responsible to help you to do the production
line desing,manufacturing,installation,
debugging and your personnel trainging jobs,Also we will provide
you one-stop service for your
production facilities procurement.
2. Equipment Supply:
Our company will not only provide you the equipments,but also will
offer you the onsite installation
instruction and guidance as well.
3. Other coopeation style.
Keep flexible and discuss.
How about after sale serivce?
1. Provide technical support and production line upgrade
2. Feedback withini 12h after receive fault notification or service
requirement
3. Free training on the user’s manual
4. User-friendly English manual or operation video for machine
using and maintanence.
5. On-the spot trainging and installation can be met if required.
6. On time delivery.
7. One Year Gruantee.
|
