81 - 90 of 163
immersion silver circuits pcb 2 layer
Selling leads
|
... This is a type of 4-layer thin PCB board built on FR-4 substrate with Tg 135°C for the application of GPS Tracker. It's only 0.5 mm thick ...
2026-05-27 18:54:21
|
|
...PCB with 25mil and 50mil Coating Immersion Gold, Immersion Tin and Immersion Silver (PCB's are custom-made products, the picture and parameters ...
2026-05-27 18:50:30
|
|
Rogers RT/duroid 5880 RF PCB with 10mil, 20mil, 31mil and 62mil Coating Immersion Gold, Immersion Silver, Immersion Tin and HASL (PCB's are custom...
2026-05-27 18:50:29
|
|
...General description This is a type of multilayer PCB built on FR-4 substrate with Tg 150°C for the application of mobile phone with blind via ...
2026-05-27 18:54:37
|
|
... for reference) Brief Introduction This is a type of low DK/DF FR-4 PCB which is built on TU-872 SLK Sp material. It is made on 4 layers copper ...
2026-05-27 18:53:55
|
|
...just for reference) General Description This is a type of low weight antenna PCB made on Taconic TLY-5Z substrate with 30mil thickness, starting 0...
2026-05-27 18:51:37
|
|
...Circuit Board (PCB) Made on S1000-2M With Immersion Gold and 90 Ohm Impedance Control (Printed Circuit Boards are custom-made products, the picture ...
2026-05-29 14:59:24
|
|
... shown are just for reference) Hello Everyone, Today we’re going to talk about RO3003 high frequency PCBs. RO3003 high frequency circuit laminates ...
2026-06-09 09:54:58
|
|
... on FR-4 substrate with Tg 135°C for the application of GPS Tracking. It's only 0.6 mm thick without silkscreen on green solder mask (Taiyo) ...
2026-05-27 18:53:51
|
|
...PCB 10 Layers 10-layer Quality Circuit Board Built on High Tg FR-4 for PLC Control Panel 1.1 General description This is a type of 10 layer printed ...
2026-05-29 14:59:28
|