Drum Wood Shredder Machine Log Chipping Machine For Wood Chips Log chipping machine is widely used, suitable for chipping of
various wood materials, with high output and few failures, which
can be installed on the foundation of concrete or steel support
structure, ground bolts. After the material is chipped, it becomes a certain specification
of small wood chips, as particleboard, MDF, fiberboard and other
paper industry raw materials, can also be used for fuel. Log chipping machine parameter | Log chipping machine | | Model | TYXP-215 | TYXP-216 | TYXP-218 | TYXP-2113 | | Feeding port size (mm) | 160*400 | 230*590 | 300*680 | 450*700 | | Fly-cutter qty (piece) | 2-3 | 2-3 | 2-3 | 2-3 | | Revolving speed (rotate/minute) | 592 | 590 | 650 | 500 | | Feeding raw materials max diameter (mm) | 160 | 230 | 300 | 450 | | Chip size (mm) | 30 | 30 | 30 | 38 | | Production capacity (ton/h) | 3-5 | 8-10 | 14-18 | 15-30 | | Main motor power( kW) | 45 | 55 | 90-110 | 200-250 | | Feeder power (kW) | (2.2-3)*2 | (3-4)*2 | (4-5.5)*2 | 7.5*2 | | Oil pump motor power (kW) | 1.5 | 1.5 | 1.5 | 3 | | Conveyor power (kW) | 3 | 3 | 4 | 4 | | Weight (kg) | 2990 | 5030 | 7000 | 11840 | | Dimension(mm) | 1470*1550*970 | 1800*1900*1210 | 2200*2150*1500 | 3670*2517*2050 |
Log chipping machine features - The alloy tool of Log chipping machine is wear-resistant and
sharp, reliable, and has long service life. The crushing chamber
adopts multi-stage crushing process and fine crushing principle
device, which is characterized by large working impact, high
production efficiency, and strong fine crushing capacity.
- Small consumption of wearing parts and low operating cost of log
chipping machine. Reasonable structure, reliable operation, low
operating costs; all parts of the crusher are wear-resistant
protection, reducing maintenance costs to a lower limit, general
service life can be increased by more than 30%.
- Chipper dust collector integrated design, the box is equipped with
dust collector at the lower part, vertical frame with filter bag
above, dust collector to receive the dust gas from the centrifugal
separator. From the entrance of the box into the box, through the
filter bag into space outside the machine. As the efficiency of the
bag filter can reach more than 97%, there is no pollution to the
working environment. Therefore, the working environment is green
and pollution-free.
Log chipping machine notes - Before the log chipping machine test, the machine should
strictly check the machine parts to see if the installation meets
the requirements, whether the screws and bolts are loose, check the
direction of rotation, it is strictly prohibited to crush flammable
and explosive materials, so as to avoid accidents.
- The log chipping machine in production should maintain uniform
feeding to protect the quality of crushing and normal production,
at the same time strictly prohibit motor overload, to protect the
normal operation of the machine.
- Pay attention to check the various parts of tightening loose, but
also should pay attention to check the wear and tear of wearing
parts, such as serious wear and tear should be replaced in a timely
manner, so as not to damage the main components, and take the
necessary fire prevention measures.
- Due to the high speed, in addition to the correct and firm
installation, should also maintain a good lubrication effect to
maintain the normal operation of the machine.
|
