Dentsply Ankylos® UCLA CoCr Base Castable Abutment (Engaging & Non-Engaging)
|
|
Engaging Dentsply Ankylos UCLA CoCr Base Castable Abutment
Dentsply Ankylos® UCLA CoCr Base Castable Abutment (Engaging & Non-Engaging)
Material: CoCr base and castable plastic chimney
Made of CoCr base and castable plastic chimney material for the stable retention of modelling materials This base is available in two types of platforms: engaging and non-engaging.
Approved by CE, ISO 9001, ISO 13485
Points of Dentsply Ankylos® C/X Abutment:
Fig. 5 Balance titanium abutments are machined with a sloping collar design in two collar heights of 1.5 and 3mm. The collar height is measured from the lowest point of the slope. Each abutment is produced with two emergence profile diameters of 5.5 (Fig.5, left, small) and 7.0mm (Fig.5, right, large) as a straight and angled (Fig.5, 15°) version. The angle of the angled abutment is designed away from the lowest point of the sloping collar. |
|||||||||||||||||||||||||||||||
| Product Tags: UCLA CoCr Base Castable Abutment Dentsply Ankylos UCLA Abutment UCLA Castable Abutment | |||||||||||||||||||||||||||||||
|
Biomet 3i Certain® UCLA CoCr Base Castable Abutment Compatibe NP 3.4mm/ RP 4.1mm/ WP 5.0mm |
|
Dentsply Xive® UCLA CoCr Base Castable Abutment Compatibe 3.0mm/ NP 3.4mm/ RP 3.8mm/ WP 4.5mm/ 5.5mm |
|
Astra OsseoSpeed® UCLA CoCr Base Castable Abutment 3.5-4.0mm (Aqua)/ 4.5-5.0mm (Lilac) |
|
MIS Seven® UCLA CoCr Base Castable Abutment Compatibe RP 3.5mm/ WP 4.5mm |
|
Astra Tech EV® UCLA CoCr Base Castable Abutment 3.6mm(Purple)/ 4.2mm(Yellow)/ 4.8mm (Blue) |
|
Dentsply Ankylos® UCLA CoCr Base Castable Abutment (Engaging & Non-Engaging) |