1 - 10 of 32
sankon metal casting molds
Selling leads
|
... nursing, and the die frame being removed. Structure: The mold is composed of frame, side plate (base plate) and clamp arm, etc. Mold frame: The ...
2025-09-16 09:39:49
|
|
|
... nursing, and the die frame being removed. Structure: The mold is composed of frame, side plate (base plate) and clamp arm, etc. Mold frame: The ...
2025-09-16 09:39:49
|
|
AAC Block Overturn Sling Product introduction The inverted spreader turns the blank body (with molds and side plates) in the air for 90 degrees, and ...
2025-09-16 09:39:49
|
|
|
AAC Block Overturn Sling Product introduction The inverted spreader turns the blank body (with molds and side plates) in the air for 90 degrees, and ...
2025-09-16 09:39:49
|
|
... will come out after being fermented nursing, and the die frame being removed. Structure: The mold is composed of frame, side plate (base plate) ...
2025-09-16 09:39:49
|
|
|
... will come out after being fermented nursing, and the die frame being removed. Structure: The mold is composed of frame, side plate (base plate) ...
2025-09-16 09:39:49
|
|
...mold is special tool for casting blanks. When the slurry from the mixer cavity is purred into the injection mold, the cutting blanks will come out ...
2025-09-16 09:39:49
|
|
|
...mold is special tool for casting blanks. When the slurry from the mixer cavity is purred into the injection mold, the cutting blanks will come out ...
2025-09-16 09:39:49
|
|
Casting mixer for AAC Line Application: The casting mixer (refer to the picture) is used for mixing concrete body before casting. It is located on the ...
2025-09-16 09:39:49
|
|
|
Casting mixer for AAC Line Application: The casting mixer (refer to the picture) is used for mixing concrete body before casting. It is located on the ...
2025-09-16 09:39:49
|