One Time Molding Fast Die Change Hydraulic Punching Machine
Features And Advantages:
1. Large output, which can reach the high output of oil pressure.
2. Low operating noise.
3. Faster speed and stable output.
4. The device is simple, easy to adjust and easy to maintain.
5. Convenient access to power sources.
6. No disturbance of the heating of the oil pressure system.
Equipment data on digital copper bar punching machine
| No. | Parameters |
| Model | KD-YYJ-40(50)T |
| Bending Power Type | Hydraulic and pneumatic hybrid |
| Pressure | 40T or 50T, Max. 80T |
| Die | Fast die change |
| Workplace Size | L450mm*W340mm |
| Control Mode | Digital control |
| Air Source | 0.6MPa |
| Power | 220~230VAC 50~60Hz 80W |
| Equipment Dimension | L680mm* W580mm* H2600mm |
Principle characteristics
1. Using compressed air as the power source, it is highly efficient
and easy to operate, with simple structure and minimal maintenance.
2. There is no noise generated by the hydraulic system during
standby, which can save power consumption and reduce production
costs.
3. The height, speed, stroke, pressure and stamping time can be
adjusted arbitrarily according to different products or molds.
4. Equipped with anti-rotation guide rods and guide plates, with
high precision, which can adapt to high-speed precision blanking.
5. Two-hand control or foot pedaling can be selected. Ensure the
personal safety of operators.
6. Using a microcomputer control system, the mode can be manual,
semi-automatic and fully automatic. Heating molds, temperature
control and pressure sensors can be added. The structure is simple,
and pneumatic technology is adopted to realize that one air
compressor can supply multiple pneumatic punching machines at the
same time, which is more energy-efficient than electric punching
machines. Reduce power consumption. The operation is simple, the
safety type is high, the foot switch is used to control the
solenoid valve, the structure is simple, the failure rate is low,
and the production efficiency is improved.
