ANSI 57-3 Glazed Wet Process Porcelain Post Insulators

 
Oem Line Post Insulators ANSI 57-3 Porcelain C-120 Line Post Insulator
 

 
Description:
 
Line post porcelain insulators shall conform in all respects to the requirements of ANSI standard. 

The insulators shall be made of good commercial-grade wet-process porcelain.

The entire surface of the insulator, with the exception of a firing surface, shall be glazed.

If gray is required, it shall be in accordance with ANSI Z55.1-1967 (R1973). 

Metal parts shall be made of a good commercial grade of malleable iron, ductile iron, steel, or aluminum.

Ferrous parts, other than stainless steel, shall be galvanized in accordance with ASTM A153.
 

Specifications:

Applications:

ANSI 57-2S Line post insulators are designed to provide rigid support of conducting cable while offering the maximum resistance to damage from electrical or mechanical events. Horizontal and gain-base line post insulators are often used in applications to avoid the need to install a cross-arm on the pole. 
 

 
Features:
 
Our porcelain insulators are manufactured using a wet porcelain process and cured in an environmentally controlled production facility to ensure a complete and even cure of the porcelain while also resulting in the highest quality surface finish.

Pre-sales service:

Choose the proper reactor type

Installation recommendations and to provide technical information

Satisfied users of the special design requirements

After-sales service:

Offer professional equipment installation instructing

Provide spare parts for wearing parts(such as post insulator, bolt, etc.)