121 - 126 of 126
m24 countersunk head screws
Selling leads
|
... head width across flats (wrench size) for three sizes—M10, M12 and M14—is 1 mm smaller like ANSI B18.2.3.1M. Compared to JIS B1180 sizes M8, M10 ...
2024-12-09 13:11:32
|
|
...head nut Description: Hammer head nut slot 6 Threaded Hole: M3 M4 M6 M8 OR Custom Material: Carbon Steel Surface treatment: Zinc Plated Slot: 5slot...
2025-04-20 13:28:06
|
|
...disk with a concentric hole and are one of the most popular flat washers. When placed under a nut or the head of a screw, the washer increases the ...
2024-12-09 13:11:32
|
|
... 4” and under in diameter. Two strength levels, grades BC and BD are summarized below. This specification is unrestricted in its configuration and ...
2024-12-09 13:11:32
|
|
.... When placed under a nut or the head of a screw, the washer increases the bearing surface area and consequently distributes the clamping force ...
2025-07-23 00:11:39
|
|
... ? Flange bolt : flange bolt by hexagon head and flange (hexagon gasket and hexagon fixed one) and screw (cylinder with external thread) two parts ...
2025-07-23 00:11:39
|