Product Description Heavy Duty Weigh Belt Feeder for Powdery Bulk Materials
Product Feathers | Main Feather | | • system accuracy: ±1%, | | • weighing range: 30t/h,25t/h,15t/h,10t/h,5t/h,1.5t/h | | Parameters | | • weighing structure: our light flat roller belt scale frame patent No. 201120235598.4 | | • belt width: 500, 650, 800, 1000, 1200, 1400, 1600 mm, etc. | | • belt skirt hem height: 60 mm | | • belt feeder length: 2.5m~6m. | | • frequency control motor: 0.25~2.2kW, AC380V/3 phases | | • reducer speed ratio: 35~945 | | Motor&Reducer Setting: | | • reducer: DZXD65 | | • reduction ratio:317 | | • variable frequency motor: 1.1kW | | • Inverter motor: YVF2-90S-4, 1400rpm, 1.1kw,ac380V | | Note:The speed orifice of Reducer turn upwards,the junction box of motor
front side of motor | Reducer Parameter: | | Name | Item | Power kw | Gear Ration | Shaft extension | L&R Install | Speed measure | Remark | | Hole | Gear | | Reducer | DZXD65 | 1.1 | 317 | 35 | Left | M16×1 | 40 | Frequency Motor |
SFT Sensor on Intelligent technique | Optional | | • Virtually deflection free weight measurement by the digital SFT
load cell with very high resolution (1:1’000’000). | | • Factory calibrated, no calibration weight needed. | | • 100 % digital connection |
Weigh Belt Feeder with Options
Settling Chamber & Schema | • For the de-airing and stabilisation of fluidised bulk materials
before being conveyed over the weighbridge. | | • Equipped with a set of chain curtains and retention plates; the
position of these elements is optimised during start-up as a
function of the material flow behaviour. | | • To be connected to the plant dedusting installation for the
elimination of the air from the fluidised bulk material. | | • Can be fitted with a «float» level measuring system to control the
prefeeder via a dedicated 3-point control loop so as to maintain a
preset settling chamber filling level. With this control concept
the material is extracted from the settling chamber with a material
bed height given by the shear gate setting |
Flowrate | Material density (kg/dm³) | 0.4 | 0.6 | 0.8 | 1 | 1.2 | Size | | Puverised coal | Pulverised Coal fly ash | Raw meal | Cement | Gypse | | Typical materials | Typical flow | | | | | | Standard | Maximum | | POWDRIT 650 | Min. min. (t/h) | 0.25 | 0.3 | 0.3 | 0.3 | 0.3 | 650 x 2700 | 650 x 4700 | | Max. max. (t/h) | 5 | 7 | 10 | 12 | 14 | | POWDRIT 800 | Min. min. (t/h) | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 800 x 2700 | 800 x 4700 | | Max. max. (t/h) | 20 | 25 | 50 | 60 | 70 | | POWDRIT 1000 | Min. min. (t/h) | 1 | 2 | 2 | 2 | 2 | 1000 x 3100 | 100 x 4700 | | Max. max. (t/h) | 35 | 50 | 90 | 110 | 135 | | POWDRIT 1200 | Min. min. (t/h) | 2 | 3 | 3 | 3 | 3 | 1200 x 3100 | 1200 x 4700 | | Max. max. (t/h) | 50 | 75 | 130 | 160</> |
|
