High Efficiency 36VDC Motor Driver Board For Curtain Machine

JUYI JYQD-V6.3E3 BLDC Motor Controller For Hall Senser Motor With  Precise Speed regulation and High Efficiency

• Product Description

JYQD-V7.3E3 is a brushless direct current motor controller with a compact size and high performance. The voltage input of this driver board is 12-36VDC,Which is used in a wide range of applications, whether it is mechanical engineering, automation, robotics or electric vehicles, our products are perfectly adapted to your needs. Whether you're in an energy-efficient industrial environment or in an innovative smart home device, our control boards deliver superior performance and reliability.

Our 12-36V brushless motor control boards offer superior power output and precise speed control. With advanced PWM speed regulation technology, it can easily cope with various load situations and achieve smooth and efficient operation. 

In addition, our control boards offer rich interfaces and flexible expandability for seamless connection and integration with other devices or systems.

You can easily realize the start-stop, forward and reverse, speed adjustment and other functions of the motor through the control board, bringing more possibilities to your project. Choose our 12-36V brushless motor control board, you will enjoy high-quality, stable and reliable products, as well as thoughtful after-sales service. We are committed to being your most trusted partner and providing a strong impetus for your projects.

• Parameter

• Application guidelines

1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.

2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding,

3. you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.

JYQD-V7.3E3 is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.

4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation

• Wiring Diagram

1.Control port

5V — Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation

Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.

Signal— Speed pulse signal output

GND—Used for Driver board internal control

2.Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

P- ----DC-

P+----DC +

3.Hall sensor port

Ha--- Hall a

Hb---Hall b

Hc---Hall c

GND---GND

5V---5V output

4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

5.Control port distance: 2.54mm,Power port distance:3.96 mm

6.Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

• Dimensional drawing

• Application

Our BLDC driver boards are widely uesed in mechanical engineering, automation, robotics or electric vehicles,etc.

• FAQ

1.Q:Can I place a sample order?

Yes, we welcome sample order to test and check quality. Mixed samples are acceptable

What about the lead time

2.It is spending 30 days generally after you making the payment.

3.Do you provide technology support?
YES. Our company have strong R&D capability, we can provide technology support if you need.

4. How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc

5. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.