BAIYUN SDM501 Industrial Two-component Potting Sealant of LED
Lighting, Eletronics Encapsulant Sealant in White Color
SDM501 Industrial Two-component Potting Sealant
Features
- Recommendatory mixing ratio is 10:1(weight ratio), the mixing ratio
is adjustable; good fluidity;
- It can be applied with needle tube, no color change after curing,
good adhesion to most materials;
- No change in performance from -40 ° C to 220 ° C;
- Excellent weathering resistance, UV resistance, aging resistance;
Main Application
- Potting for the product of electronic components, power modules,
etc.;
- Sealing for the product of electronics and electrical modules.
Typical Technical Data
| Test Item (after curing performance) | Test Result |
| Appearance | Black or clear fluid |
| Viscosity (MPa.S) | 2100 |
| Snap Time (min) | 55 |
| Volume Resistivity (Ω.m) | 4.5×1013 |
| Voltage breakdown strength (MV/m) | 11 |
| Tensile strength (Dumbbell specimen MPa) | 1.25 |
| Ultimate elongation (%) | 100 |
Technical Service
- Provide complete technical data of products;
- According to customer requirements, the formulation of the product
is debugged to meet the customer's requirements for certain special
properties of the product:
- Provide adhesion test for users, appraise adhesion performance of
sealant products for industry of the company and material selected
by users, and offer the contents such as in test results,
recommended surface washing method of products and whether priming
or not in writing to users;
- It is welcome to cooperate with our engineers, communicate and
discuss solutions together.
Notice
This product is non-toxic after it is fully cured, but should avoid
contact with eyes and children before curing; keep the ventilation
in the working environment.
Note to users: The information published in this article is all
that we believe to be reliable. Due to the wide variety of
situations, we cannot understand all the situations, so we cannot
guarantee the correctness and applicability of our products in
certain usages and uses. Users should understand the product in
detail before using the product, and then decide the best way to
use it.
