131 - 140 of 247
wireline tool string swivel joint
Selling leads
|
2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint ...
2024-12-09 22:47:42
|
|
... and instrument strings, and can also be used in vertical shafts, inclined shafts and horizontal Wells. A roller is installed on the support arm of ...
2026-02-26 16:38:26
|
|
...profile nipple. It can be used to act as a lower stop for downhole devices and can be used as an upper stop to secure tools so that they do not ...
2024-12-09 22:39:11
|
|
...string. Because the weighting rod and the jar cannot adjust the bending degree, the universal joint can ensure the normal operation of the steel ...
2024-12-09 13:35:27
|
|
...Ball Knuckle Joint Wireline Slickline QLS Connection Wireline Roller Ball Knuckle Joint Wireline Tool String Ⅰ. Introduction Wireline Roller Ball ...
2024-12-09 13:22:13
|
|
... two tool string items with incompatible threads. II.Structural features: The top thread of wireline crossover is male thread (or quick male joint) ...
2024-12-09 13:22:13
|
|
...Joint Wireline Tool String 1.5 inch I. Overview: The QLS quick Joint is connectors for wire tool strings that replace conventional threaded ...
2024-12-09 13:46:36
|
|
...Wireline Knuckle Joint Slickline Tool I.Overview: The Wireline Knuckle joint is a ball-shaped design that can deflect the Angle between the jar and ...
2024-12-09 22:39:11
|
|
... into small drift diameter from large drift diameter in the entering process, which usually is connected with the lowest end of tool string. Ⅱ...
2024-12-09 13:22:13
|
|
... the tool string inside large bore tubing. Normally used in the tool string when running pressure and temperature gauges, it helps centralize and ...
2024-12-09 13:22:13
|