141 - 150 of 435
wireline tool string calibration tool
Selling leads
|
2.813 inch BO type selection positioning tool I. Overview: BO type selection positioning tool can choose any sliding sleeve to move and close SSD type ...
2024-12-09 13:42:53
|
|
... into small drift diameter from large drift diameter in the entering process, which usually is connected with the lowest end of tool string. Ⅱ...
2024-12-09 13:22:13
|
|
... two tool string items with incompatible threads. II.Structural features: The top thread of wireline crossover is male thread (or quick male joint) ...
2024-12-09 13:22:13
|
|
...Knuckle Joint Wireline Slickline QLS Connection Wireline Roller Ball Knuckle Joint Wireline Tool String Ⅰ. Introduction Wireline Roller Ball ...
2024-12-09 13:22:13
|
|
... the tool string inside large bore tubing. Normally used in the tool string when running pressure and temperature gauges, it helps centralize and ...
2024-12-09 13:22:13
|
|
...string. Because the weighting rod and the jar cannot adjust the bending degree, the universal joint can ensure the normal operation of the steel ...
2024-12-09 13:35:27
|
|
...25 inch Rope Socket Wireline Tool String Low Maintenance Wireline Pear Drop Rope Socket Wireline Tool String Ⅰ. Applications Wireline Pear Drop ...
2024-12-09 13:35:27
|
|
1.5 inch Pear Drop Rope Socket Wireline And Slickline Tools Pear Drop Rope Socket Wireline Tool String I. Overview A slip rope socket is used to ...
2024-12-09 13:22:13
|
|
... and also enable the toolstring to fall against the differential pressure acting on the cross section of the wireline and friction at the wireline ...
2024-12-09 13:22:13
|
|
Oil Downhole Tools 2.125 Inch Pear Drop Rope Socket Wireline And Slickline Wireline Pear Drop Rope Socket Wireline Tool String Ⅰ.Introduction (B) The ...
2024-12-09 13:22:13
|