261 - 270 of 471
wireline tool crossover
Selling leads
|
Wireline Tubing Perforator 2-3/8inch Wireline Fishing Tools 1 product overview: TheTubing Perforators including barrel, body, bracket, punch and ...
2024-12-09 22:39:11
|
|
... operation. Run the Gauge cutter before running the downhole tool to determine whether the downhole device can pass through the tubing and to ...
2024-12-09 22:47:42
|
|
... fishing claw and move upward to release the claw, and which is divided into three types: SB, SM and SS. The GS type pulling tool is used to pull ...
2024-12-09 13:22:13
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
2.875 Inch Alloy Steel Tubing Stop Wireline Pulling Tool Tubing Stop Wireline Pulling Tool Ⅰ. Introduction The type tubing perforator (tubing punch) ...
2024-12-09 13:22:13
|
|
QLS SR Tubing Perforator Punch Wireline Pulling Tool Tubing Perforator Punch Wireline Pulling Tool Ⅰ. Introduction Tubing Perforator Punch is a ...
2024-12-09 13:22:13
|
|
... Wire finder is a one piece tool which has a standard wireline fishing neck and threads uppermost and a slotted skirt down. II General Technical ...
2025-04-07 11:25:50
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
...Tools For Wireline Pulling Tool I. Overview: The S-type Pulling tool is an external Pulling tool. Its structure principle is similar to the JD type ...
2024-12-09 13:39:37
|