31 - 40 of 56
wireline supported roller centralizer
Selling leads
|
Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated ...
2024-12-09 17:07:01
|
|
...ng the underside wall of the tubing. The use of rollers greatly reduces the friction that conventional stem would encounter. II.General Technical ...
2024-12-09 17:08:42
|
|
... and also enable the toolstring to fall against the differential pressure acting on the cross section of the wireline and friction at the wireline ...
2024-12-09 13:22:13
|
|
Wireline Roller Ball Knuckle Joint Wireline Tool String Ⅰ.Introduction Wireline Roller Ball Knuckle Joint is used to add flexibility within the tool ...
2025-04-07 11:25:47
|
|
Wireline Roller Knuckle Joint Wireline Tool String 1.875 inch Ⅰ. Introduction Wireline Roller Knuckle Joint are used to add flexibility within the ...
2024-12-09 13:22:13
|
|
...the chuck through the chain. The chuck drives the roller to rotate, and the cable (or wire) is wound around the roller at a uniform speed. This ...
2025-09-18 00:16:18
|
|
Gyroscopes Wireline Tool String 1.5 Inch Roller Knuckle Joint Material aluminum alloy I. Introduction Wireline Roller Ball Knuckle Joint Wireline Tool ...
2024-12-09 13:36:45
|
|
Wireline Roller Ball Sub Wireline Tool String I. Overview: The ball joint is used in the tool string to connect the upper and lower ends of the tool, ...
2024-12-09 13:44:44
|
|
1.875 Inch Roller Knuckle Joint Wireline Tool String Ⅰ. Introduction The Roller Knuckle Joint is a wire tool attachment, which is used to provide a ...
2024-12-09 13:33:15
|
|
2.5 Inch Roller Swivel Joint Wireline Tool String I. Overview: The Roller Swivel Joint can carry out wire rope operation more quickly and quickly, ...
2024-12-09 18:33:53
|