471 - 480 of 491
wireline sm pulling tool
Selling leads
|
...connected to the tool string and run down the well. The lower end of the sand bailer is inclined, which is conducive to the well. Its working ...
2024-12-09 23:37:06
|
|
2.313 inch BO type selection and positioning tool I. Overview: BO type selection positioning tool can choose any sliding sleeve to move and close SSD ...
2024-12-09 13:42:53
|
|
Wireline Slickline Tools Baker Vise Surface Equipment 1.75Inch～12Inch Overview The baker vise is a tool used for quick clamping in field operations. ...
2025-04-07 11:25:52
|
|
Wireline 4 inch QLS Quick Connection Cement Dump Bailer Slickline Tool Introduction The dump bailer is Connect with the tool string used to pour acid, ...
2025-10-12 00:19:12
|
|
3-1/2 Tubing Perforator Slickline Fishing Tools I. Overview: The punch in the Tubing Perforator Slickline Fishing Tools is seated in the conical wedge ...
2024-12-09 13:49:41
|
|
3.5 Inch Type A Puncher With Spare Parts I. Overview: The punch in the A-type tubing piercer is seated in the conical wedge groove. After the tool is ...
2024-12-09 13:42:35
|
|
Equalizing prong and Lock Mandrel AFH Plug Slickline Tool 1.75inch ～3.81inch Overview The AFH plug uses a sealing assembly to seal at the designated ...
2025-06-23 07:30:25
|
|
.... should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface control. ...
2024-12-09 13:36:45
|
|
... be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface control. This ...
2024-12-09 13:42:35
|
|
.... should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface control. ...
2024-12-09 17:09:40
|