181 - 190 of 203
wireline roller stem tool string
Selling leads
|
.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel ...
2024-12-09 13:49:41
|
|
... and a guide surface. It goes down the well in a conventional manner, and if there are no foreign objects on the cap, the bevel of the cutter will ...
2026-06-19 00:13:05
|
|
2.5inch～5.5inch QLS Tubing Swab Tool Wireline Slickline Toolstring Overview The tubing swab tool is mainly used in the swabbing and draining operation ...
2025-04-07 11:25:53
|
|
... string.It is also widely used to cut wireline on a rope socket during fishing operations Actual O.D. Fishneck O.D. Connections 1.5" 1.187" 15/16UN ...
2026-06-19 00:13:05
|
|
... string.It is also widely used to cut wireline on a rope socket during fishing operations Actual O.D. Fishneck O.D. Connections 1.5" 1.187" 15/16UN ...
2024-12-09 13:42:17
|
|
...an unknown object within the tubing string. Upon light downward jarring, the shape, size and position of the top of the object will be imprinted on ...
2024-12-09 13:22:23
|
|
...connected to the tool string and run down the well. The lower end of the sand bailer is inclined, which is conducive to the well. Its working ...
2024-12-09 23:37:06
|
|
... for tool string. Because the weight bar and jar cannot adjust its bending degree, The Mono-conductor Knuckle Joint can ensure the normal operation ...
2024-12-09 13:22:13
|
|
... only. The 2.75 BO Selective Shifting Tool is designed to selectively shift the inner sleeve of a sliding side door circulating device into the ...
2024-12-09 13:22:23
|
|
...Inch X XN Wireline Lock Mandrel Running Tool X/XN Lock Mandrel Wireline Running Tool I．Introduction An X/XN lock mandrel is used to install flow ...
2024-12-09 13:22:23
|