81 - 90 of 139
wireline roller knuckle joint
Selling leads
|
...Joint Wireline Pressure Control Equipment I. Overview The wellhead joint is used to connect the blowout preventer and the wellhead, the upper part ...
2024-12-09 22:39:11
|
|
... and center logging toolsaccurately in vertical or deviatedwells. The arms are precisionengineered and mechanicallylinked to provide a constantradi...
2024-12-09 23:33:18
|
|
... and instrument strings, and can also be used in vertical shafts, inclined shafts and horizontal Wells. A roller is installed on the support arm of ...
2026-02-26 16:38:26
|
|
Quick Union Crossover Wireline Pressure Control Equipment ID 3 Inch I.Introduction: 1. Align the union outer joint with the inner joint and screw on ...
2024-12-09 13:22:13
|
|
...Wireline Pulling Tool A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is usually ...
2025-04-07 11:25:41
|
|
...Wireline Pulling Tool I.Overview The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and ...
2025-04-07 11:25:41
|
|
...Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2025-04-07 11:25:44
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|