331 - 340 of 490
wireline gr pulling tool
Selling leads
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
... separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: SIZE FISHING CONNECTION 2-3/8＂ 1.375＂ ...
2024-12-09 13:30:01
|
|
...Tool Wireline Running Tool I.Introduction: B-type self-release positioning tool, used to place the A and X-type closed sliding sleeves in the open ...
2024-12-09 13:35:27
|
|
...Tool Wireline Running Tool I.Introduction: B-type self-release positioning tool, used to place the A and X-type closed sliding sleeves in the open ...
2024-12-09 13:35:45
|
|
Custom Slickline Wireline Running Tool X Running Tool I. Overview: The X-type running tool is a special tool for putting X/XN-type lock cores. It can ...
2024-12-09 13:40:21
|
|
1.875 inch Custom Slickline Wireline Running Tool R Running Tool Introduction An R running tool is a special tool used to run and set R/RN type lock ...
2024-12-09 13:40:21
|
|
... sliding sleeves. The selection key can be used as a non-self-release type but released by a shear pin. B-type self-release tools cannot pass ...
2024-12-09 17:05:03
|
|
...type self-release positioning tool, which can shift XA, RA, XO, XD, A, C, CB, WB, L and CM-type sliding sleeves. The selection key can be used as a ...
2024-12-09 17:08:26
|
|
Wireline Running F Collar Stop Tools 2-7/8Inch～4-1/2Inch Slickline Tools Introduction The F collar stop tools is mainly composed of an upper joint, ...
2025-10-29 00:15:29
|
|
...Wireline Tool String Introduction (B) A tubular jar is designed to act like a sliding hammer, utilizing the weight of the stem located immediately ...
2025-04-07 11:25:38
|