441 - 450 of 484
wireline crossover tool string
Selling leads|
... is connected with hydraulic stuffing box and grease injection system. Usually lubricator length is 8ft, sometimes also available 4ft and 7ft, it’s ...
2025-04-07 11:25:35
|
|
...Wireline Pressure Control Equipment I.Overview Quick Test Sub is a safety device normally placed on top of the upper Lubricator just below the ...
2024-12-09 13:22:13
|
|
...relies on the special dropping tool to drop into the predetermined position, and does not rely on the shock of the jar to complete the throwing. ...
2024-12-09 13:22:23
|
|
Wireline Clamp Wellhead Wireline Pressure Control I.Introduction: The wire clamp (wire clamp/cable clamp) is a tool for temporarily clamping the wire...
2024-12-09 13:35:45
|
|
... downhole tools in and out of the well under Lubricator. The lower part of the blowout preventer is connected with the blowout Lubricator, and the ...
2024-12-09 17:06:32
|
|
2.313 inch BO type selection and positioning tool I. Overview: BO type selection positioning tool can choose any sliding sleeve to move and close SSD ...
2024-12-09 13:42:53
|
|
... and tensile loads while retaining an outside diameter common to most tool strings. They are available with custo- mer specified bottom threaded ...
2024-12-09 13:22:13
|
|
API 2.5 inch JUL Pulling Tool Slickline For Balance Bar Stopper restrictor I. Introduction: The JU type pulling tool is used to fish the tools or ...
2024-12-09 13:22:13
|
|
3-1/2 Tubing Perforator Slickline Fishing Tools I. Overview: The punch in the Tubing Perforator Slickline Fishing Tools is seated in the conical wedge ...
2024-12-09 13:49:41
|
|
Transport Skid Wireline Pressure Control Equipment I. Introduction The transport skid is mainly used to store simple equipment for wellhead wire tools...
2024-12-09 13:22:13
|
