191 - 200 of 211
wireline crossover string
Selling leads
|
GO Devil Cutter Bar type Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil ...
2024-12-09 13:22:51
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
1.5 Inch Unlatching Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end ...
2024-12-09 13:30:01
|
|
1.25 Inch Running Tool Wireline Pressure Gauge Hanger I. Overview: The Running tool is a tool for dropping well instruments. The upper end is ...
2024-12-09 13:34:00
|
|
...Wireline Pressure Control Equipment Ⅰ. Introduction The Quick Test Sub is designed to save drilling time while pressure testing the lubricator ...
2024-12-09 13:44:16
|
|
Flat Bottomed Type GO Devil Wireline Fishing Tool I. Overview: The Flat Bottomed Type GO Devil is used to cut the stuck tool string wire. The Flat ...
2024-12-09 13:49:41
|
|
Cutter Bar Type Go Devil Wireline Fishing Tool 1.5inch I Overview The Cutter Bar Type Go Devil is used to cut the stuck tool string wire. The diagonal ...
2026-06-19 00:13:05
|
|
...Tubing Broach Connection QLS 3.5inch to 4.3inch Gauge Cutter Wireline Slickline Tools Product presentation The Diamond Broaches are used to remove ...
2024-12-09 22:47:42
|
|
...bailer is connected to the wireline tool string and lowered into the well. The inner body of the sand bailer is a sealed chamber of atmospheric ...
2024-12-09 23:20:31
|
|
... and instrument strings, and can also be used in vertical shafts, inclined shafts and horizontal Wells. A roller is installed on the support arm of ...
2026-02-26 16:38:26
|