171 - 180 of 212
variable weight wireline tool string
Selling leads
|
... for tool string. Because the weight bar and jar cannot adjust its bending degree, The Mono-conductor Knuckle Joint can ensure the normal operation ...
2024-12-09 13:22:13
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
... the downhole device. 2.Structural features The Wireline Scratcher is drilled some holes along the weighted rod body evenly rotating in the ...
2024-12-09 22:39:11
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
Anti Corrosion Wireline Fishing Tool Wireline Blind Box Wireline Fishing Tool Wireline Blind Box I.Overview The Blind Box is used to beat down an ...
2024-12-09 13:22:13
|
|
2 inch Wireline Blind Box Wireline Fishing Tool Wireline Fishing Tool Wireline Blind Box The Blind Box is used to beat down an obstruction encountered ...
2024-12-09 13:42:53
|
|
...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed ...
2024-12-09 13:22:51
|
|
.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel ...
2024-12-09 13:49:41
|