171 - 180 of 216
variable length wireline tool string
Selling leads
|
... falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve...
2024-12-09 22:39:11
|
|
...Wireline Fishing Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod ...
2024-12-09 13:48:14
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
... is lowered in the well. Ⅱ. General Technical Parameters OD of body Fishing neck Connection Length PN 1.5＂ 1.375＂ 15/16UN 2ft W23-01.00 1.875＂ 1.75...
2024-12-09 13:22:13
|
|
...Wireline Brush Gauge Cutter Slickline Tools I.Introduction The Wireline Brush is used to brush out scale, waxes or packing debris from the tubing ...
2024-12-09 13:22:13
|
|
... in the well. Ⅱ. Common technical parameters: Diameter of body Fishing neck Connection thread Length Code 1.5＂ 1.375＂ 15/16UN 2ft W23-01.00 1.875＂ ...
2024-12-09 13:22:13
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
Anti Corrosion Wireline Fishing Tool Wireline Blind Box Wireline Fishing Tool Wireline Blind Box I.Overview The Blind Box is used to beat down an ...
2024-12-09 13:22:13
|