71 - 80 of 377
steel fishing wireline pulling tool
Selling leads
|
...Pulling Tool Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an ...
2024-12-09 13:42:17
|
|
...release the claw, and which is divided into three types: RB, RS and RJ. II. General Technical Parameters: Size Fishing neck Connection PN. 1.5＂ 1...
2024-12-09 13:42:17
|
|
...Wireline Pulling Tool For Fishing I. Overview: S-type Pulling tool is an external fishing tool. Its structure principle is similar to JD Pulling ...
2024-12-09 13:35:27
|
|
... of the outer fishing neck with special fishing claw and move upward to release the claw, and which is divided into three types: SB, SM and SS. II. ...
2024-12-09 13:22:13
|
|
...necks, which can cut off and release an object downward and is usually is used to throw and fishing the lock cylinder, packer, bridge plug and ...
2024-12-09 13:22:13
|
|
...the upper joint of the fishing guide tool. In this way, smaller fishing tools can be used in larger oil pipes. At the same time, it can also be ...
2024-12-09 13:43:12
|
|
...used to throw and fishing the lock cylinder, packer, bridge plug and others with inner fishing necks. After connecting the GU joint (upward shear ...
2024-12-09 13:51:51
|
|
...Pulling Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an ...
2024-12-09 17:08:26
|
|
... (such as balance bar, plug, choke, etc.). It can be shaken up. II.Technical Specifications Actual outer Diameter Fishing Neck Connecting Thread ...
2024-12-09 13:22:13
|
|
... into three types: SB, SM and SS. II. General Technical Parameters Size Actual OD Fishing neck Connection Grasping diameter Grasping distance PN SB ...
2024-12-09 13:42:17
|