281 - 290 of 352
sr connection wireline tool string
Selling leads
|
...Tool Catcher 70Mpa 10K H2S Wireline Pressure Control Equipment Overview The hydraulic tool catcher is composed of a body, a mandrel, a fish claw, a ...
2026-07-02 00:11:48
|
|
Wireline Slickline Pressure Test Plug And Test Cap And Lifting Cap Control Equipment Introduction The internal and external pressure test plug is a ...
2025-04-07 11:25:53
|
|
... lower connector, the union nut, the protective plate, the piston, the spring, the sealing parts, and the rubber parts. The lower connector at the ...
2025-12-27 00:34:27
|
|
... the claw, and which is divided into three types: RB, RS and RJ. II. General Technical Parameters Size Actual OD Fishing neck Connection Grasping ...
2025-04-07 11:25:42
|
|
...Tool Wireline Pulling Tool A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object downward and is ...
2025-04-07 11:25:41
|
|
...Tool Wireline Pulling Tool I.Overview The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an object ...
2025-04-07 11:25:41
|
|
...Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and release an ...
2025-04-07 11:25:44
|
|
...release the claw, and which is divided into three types: SB, SM and SS. II. General Technical Parameters: Size Fishing neck Connection PN 1.25＂ 1＂ ...
2025-04-07 11:25:46
|
|
... (such as balance bar, plug, choke, etc.). It can be shaken up. II.Technical Specifications Actual outer Diameter Fishing Neck Connecting Thread ...
2024-12-09 13:22:13
|
|
... upward to release the claw, and which is divided into three types: RB, RS and RJ. II.General Technical Parameters Size Fishing neck Connection ...
2024-12-09 13:22:13
|