361 - 370 of 370
slickline operations pulling tool
Selling leads
|
...clamp) is a tool for temporarily clamping steel wire/cable when lifting lubricator at wellhead. It is often used to clamp steel wire or cable on ...
2024-12-09 13:35:45
|
|
... steel wire well testing tools and instruments for simple underground operation. Because of its simple assembly, light weight and quick operation, ...
2024-12-09 13:22:51
|
|
... at the wellhead. It is often used to clamp steel wires or cables on the ground during the lifting of the blowout preventer and during the salvage ...
2024-12-09 13:35:27
|
|
...tool for temporarily clamping the wire/cable when lifting the blowout pipe at the wellhead. It is often used to clamp steel wires or cables on the ...
2024-12-09 13:35:45
|
|
... is connected with hydraulic stuffing box and grease injection system. Usually lubricator length is 8ft, sometimes also available 4ft and 7ft, it’s ...
2025-04-07 11:25:35
|
|
... Equipment Ⅰ. Introduction During Wireline operations it is necessary to break the quick union between the lower lubricator and the BOP to remove ...
2024-12-09 13:22:13
|
|
...remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to ...
2024-12-09 13:22:13
|
|
... is convenient, and it plays a very good auxiliary role in the operation preparation stage. II. General Technical Parameters Bore Work Pressure ...
2024-12-09 13:22:13
|
|
..., and there is no pressure above the HFH type plug to ensure the safe operation of the wellhead. II. Common technical parameters: Size Lock ...
2024-12-09 17:05:03
|
|
...mainly used to store simple equipment for wellhead wire tools, so as to save space. Its structure is simple, transportation is convenient, and it ...
2024-12-09 22:39:11
|