21 - 30 of 143
running tools wireline lock mandrel
Selling leads
|
1.5 inch Custom Slickline Wireline Running Tool X Running Tool Introduction An X running tool is a special tool used to run and set X/XN type lock ...
2024-12-09 13:46:53
|
|
...Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device that is seated in a pre-set ...
2024-12-09 13:49:50
|
|
...Mandrel Slickline Wireline Nickel Alloy XX plug Wireline Running Tool I.Overview: The XX plug is a fluid control device that is seated in a pre-set ...
2024-12-09 22:39:11
|
|
...o the tool to keep balance valve in open position, fixed in the welded joint is located and go into the tool, stabilizer bar will be pushed to the ...
2025-05-20 07:31:34
|
|
Equalizing prong and Lock Mandrel AFH Plug Slickline Tool 1.75inch ～3.81inch Overview The AFH plug uses a sealing assembly to seal at the designated ...
2025-06-23 07:30:25
|
|
Custom Slickline Wireline Running Tool X Running Tool I. Overview: The X-type running tool is a special tool for putting X/XN-type lock cores. It can ...
2024-12-09 13:40:21
|
|
...Pulling Tool Wireline Pulling Tool Ⅰ. Introduction GR pulling tool is composed of GU shear up adaptor (upward shear adaptor) and GS pulling tool ...
2025-04-07 11:25:46
|
|
...Wireline Running Tool BO Shifting Tool BO Selective Shifting Tool Wireline Running Tool BO Shifting Tool is used to locate and either open or close ...
2024-12-09 13:22:23
|
|
... side door by simply deploying the tool with the in the selective position, this will allow for the shifting tool to pass through the shifting ...
2024-12-09 13:40:30
|
|
...close a desired sliding side door by simply deploying the tool with the in the selective position, this will allow for the shifting tool to pass ...
2026-06-29 20:01:43
|