191 - 200 of 218
rope socket wireline tool string
Selling leads
|
... falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve...
2024-12-09 22:39:11
|
|
...Wireline Fishing Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod ...
2024-12-09 13:48:14
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
...Cable Cutter Wireline Fishing Tool Flopetrol Cable Cutter Wireline Fishing Tool Ⅰ. Overview: Flopetrol Cutter, when downhole tools get stuck and ...
2024-12-09 13:35:45
|
|
... and a guide surface. It goes down the well in a conventional manner, and if there are no foreign objects on the cap, the bevel of the cutter will ...
2026-06-19 00:13:05
|
|
...bailer is connected to the wireline tool string and lowered into the well. The inner body of the sand bailer is a sealed chamber of atmospheric ...
2024-12-09 23:20:31
|
|
... Alloy Wireline Scratcher Slickline Tools 2.5 Inch Gauge Cutter Wireline Wireline Scratcher Gauge Cutter Wireline I.Introduction A wireline brush ...
2024-12-09 13:22:13
|