161 - 170 of 173
qls wireline well pulling tools
Selling leads
|
...Tool Trap Wireline 5-3/4-4ACME.O Type 70MPA Wireline Pressure Control Equipment Product overview Hydraulic Tool Trap also known as trap. It is a ...
2025-08-21 08:50:05
|
|
... to a vertical position en route to the stuffing box from the wireline unit. This tool is generally positioned at the wellhead on the lubricator to ...
2024-12-09 13:22:13
|
|
...Wireline Tools HDQRJ Connection I. Introduction A wireline gauge cutter is a wireline tool designed to gauge and scrape clean the wall of the ...
2024-12-09 13:22:13
|
|
... created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices in the ...
2024-12-09 17:09:11
|
|
..., sleeve and brass wedge (pear drop) The pear drop is grooved to accommodate the wire and comes complete with a securing grub screw The more pull ...
2024-12-09 13:22:13
|
|
..., sleeve and brass wedge (pear drop) The pear drop is grooved to accommodate the wire and comes complete with a securing grub screw The more pull ...
2024-12-09 17:09:11
|
|
Wireline 2.3Inch Alligator Grab Slickline Tools API Spec Introduction Alligator grab are suitable for use in wire operations. They can be used to ...
2026-04-02 00:33:02
|
|
... forces created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices ...
2024-12-09 13:36:45
|
|
...ht be used to test tubing or to plug tubing to perform repairs or replacement of surface equipment. Equalization is achieved by pulling the ...
2024-12-09 22:39:11
|
|
Wireline Gauge Cutter Wireline Gauge Cutter I. Introduction The Tubing Gauge Cutter is a wireline tool designed to gauge and scrape clean the i.d. Of ...
2024-12-09 13:22:13
|