21 - 30 of 69
qls connection fluted centralizer
Selling leads
|
Wireline Overshot Wireline Pulling Tool I. Overview: The slip overshot is used to salvage tools or objects that have no conventional salvage necks in ...
2024-12-09 13:41:25
|
|
2 inch GS Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 13:42:17
|
|
1.25 inch SM Wireline Pulling Tool I. Introduction An S type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing ...
2024-12-09 13:42:17
|
|
Roller Ball Sub Wireline Tool String I. Overview: The ball joint is used in the tool string to connect the upper and lower ends of the tool, and at ...
2024-12-09 13:44:26
|
|
3 Inch JDS Pulling Tool Wireline Pulling Tool I.Introduction JD pulling tool is a fishing tool that can be used to launch and salvage tools or ...
2024-12-09 17:05:03
|
|
3 inch Wireline Overshot Wireline Pulling Tool I. Overview: The Wireline Overshot is used to salvage tools or objects that have no conventional ...
2024-12-09 17:45:15
|
|
Wireline Grab Two Legged Wierline Fishing Tools I. Overview: The spear in the steel wire is used to catch the steel wire broken in the tubing. The ...
2024-12-09 13:43:12
|
|
Well Recovery Wireline Tool String I. Introduction The Well Recovery through the well is similar to that of the scraper, and it is an important ...
2024-12-09 13:49:41
|
|
..., or spear to the upper connector of the bell guide tool. This allows smaller pulling tools to be used in larger tubing. At the same time, it can ...
2024-12-10 00:01:07
|
|
... characteristics The centralizer block has a simple structure and consists of two identical bodies which are connected together by screws. The ...
2025-04-07 11:25:47
|