41 - 50 of 122
nickel alloy knuckle joint
Selling leads
|
Wireline Swivel Joint Wireline Tool String I.Introduction The Swivel Joint is a wireline accessory used minimise the effect of line twist caused by ...
2024-12-09 13:22:13
|
|
2.5 Inch Roller Swivel Joint Wireline Tool String I. Overview: The Roller Swivel Joint can carry out wire rope operation more quickly and quickly, ...
2024-12-09 18:33:53
|
|
Wireline Crossover Wireline Tool String Introduction (B) A wireline crossover is a wireline tool string adapter designed to connect two tool string ...
2024-12-09 13:22:13
|
|
GS Pulling Tool Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and release an ...
2024-12-09 13:42:17
|
|
Bell Guide Set Wireline Pulling Tool I. Product Brief The bell guide tool is composed of an upper joint and a guide tube. Connect the upper end of the ...
2024-12-09 13:43:12
|
|
GS Type Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 13:51:51
|
|
3 inch GS Type Pulling Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 17:08:26
|
|
1.875 inch Wireline Crossover Wireline Tool String I.Introduction The wireline crossover is a wireline tool string adapter designed to connect two ...
2024-12-09 17:09:11
|
|
Alloy Steel&Nickel Alloy Centre Spear Wireline Fishing Tools I. Overview: The steel wire fishing spear is used to fish the steel wire broken in the .....
2024-12-09 13:22:51
|
|
BO Type Selective Positioning Tool Alloy Steel&Nickel Alloy I. Overview: The BO-type selection positioning tool can select any sliding sleeve to move ...
2024-12-09 13:41:08
|