171 - 180 of 210
high flexibility wireline tool string
Selling leads
|
...Wireline Lock Mandrel Running Tool XN Lock Mandrel Wireline Running Tool I．Introduction An XN lock mandrel is used to install flow control devices, ...
2024-12-09 13:49:50
|
|
Wireline Lightweight Lubricator 3Inch 10,000PSI Wireline Pressure Control Equipment overview The lightweight lubricator is pipe with standing high ...
2025-12-27 00:34:27
|
|
...Wireline Fishing Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod ...
2024-12-09 13:48:14
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
...Wireline Pressure Gauge Hanger I. Overview: The unlatching tool is a tool for putting in downhole instruments, with the upper end connected with ...
2024-12-09 13:30:01
|
|
Anti Corrosion Wireline Fishing Tool Wireline Blind Box Wireline Fishing Tool Wireline Blind Box I.Overview The Blind Box is used to beat down an ...
2024-12-09 13:22:13
|
|
2 inch Wireline Blind Box Wireline Fishing Tool Wireline Fishing Tool Wireline Blind Box The Blind Box is used to beat down an obstruction encountered ...
2024-12-09 13:42:53
|
|
...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed ...
2024-12-09 13:22:51
|
|
.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel ...
2024-12-09 13:49:41
|