351 - 360 of 475
fluted centralizer wireline tool
Selling leads
|
1.5 Inch Flopetrol Cutter Wireline Fishing Tool Ⅰ. Overview: Flopetrol Cable Cutter,When downhole tools are stuck and cannot be recovered, Use this ...
2024-12-09 13:22:13
|
|
...Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed ...
2024-12-09 13:22:51
|
|
... separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: Size Fishing neck Connection 2-3/8＂ 1...
2024-12-09 13:36:45
|
|
GU Shear Up Adaptor Wireline Pulling Tool I. Introduction GU Shear Up Adaptor is used in connection with GS pulling tool, and they form GR Pulling ...
2024-12-09 13:39:37
|
|
.... II. Technical parameters: Tools O.D. Fishneck O.D. Connection Type 1.5〞 1.187〞 UN/JHQ/JHP 1.75〞 1.375〞 UN/JHQ/JHP 1.875〞 1.750〞 UN/JHQ/JHP 2.〞 1...
2024-12-09 13:41:25
|
|
2 inch GU Adapter Wireline Pulling Tool I. Introduction GU Adapter is used in connection with GS pulling tool, and they form GR Pulling Tool. II...
2024-12-09 13:42:17
|
|
.... If there is no foreign matter on the rope cap, the inclined plane of the cutter will directly cut the steel wire on the rope cap. When the steel ...
2024-12-09 13:49:41
|
|
... instruments separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: Size Fishing neck ...
2024-12-09 17:11:33
|
|
...Wireline Pressure Gauge Hanger I. Overview: Anti-moving tool is a kind of tool connected in tool string to prevent tool string from running up. It ...
2024-12-09 18:18:16
|
|
... instruments separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: Size Fishing neck ...
2024-12-09 18:35:02
|