251 - 260 of 315
crossover slickline tool string
Selling leads
|
2.813 inch BO type selection positioning tool I. Overview: BO type selection positioning tool can choose any sliding sleeve to move and close SSD type ...
2024-12-09 13:42:53
|
|
GS Type Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 13:51:51
|
|
3 inch GS Type Pulling Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 17:08:26
|
|
BLQJ HDQRJ Paraffin Knife Gauge Cutter Slickline API Q1 approved Paraffin Knife Gauge Cutter Wireline I. Introduction Paraffin Knife Gauge Cutter ...
2024-12-09 13:22:13
|
|
... before running the downhole tool determines whether the downhole device can pass through the tubing and where in the tubing sits the joint. At the ...
2024-12-09 13:22:13
|
|
... and tensile loads while retaining an outside diameter common to most tool strings. They are available with custo- mer specified bottom threaded ...
2024-12-09 13:22:13
|
|
1.25 inch SM Wireline Pulling Tool I. Introduction An S type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing ...
2024-12-09 13:42:17
|
|
... can be attached to the downhole instrument alone and released in the downhole, or it can be attached to the upper part of the tool string. After ...
2024-12-09 22:39:11
|
|
Thin Walled Wirefinder Wireline Fishing Tool 2.5 Inch Wirefinder Wireline Fishing Tool I Introduction. Wire finder, also known as detector, is a thin...
2024-12-09 13:35:18
|
|
... separately, but also can be connected to the upper part of downhole tool string. II. Technical parameters: Size Fishing neck Connection 2-3/8＂ 1...
2024-12-09 13:27:31
|