281 - 290 of 324
centralizer slickline tool string
Selling leads
|
... Tool Trap Wireline 5-3/4-4ACME.O Type 70MPA Wireline Pressure Control Equipment Product overview Hydraulic Tool Trap also known as trap. It is a ...
2025-08-21 08:50:05
|
|
... for tool string. Because the weight bar and jar cannot adjust its bending degree, The Mono-conductor Knuckle Joint can ensure the normal operation ...
2024-12-09 13:22:13
|
|
...Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil Cutter Bar type is composed of a solid rod ...
2024-12-09 13:22:51
|
|
... Tool I. Overview: GO Devil Flat Bottomed are used to cut stuck tool string wires. Flat bottom wire cutters consist of a solid rod with grooves and ...
2024-12-09 13:48:14
|
|
... and a guide surface. It goes down the well in a conventional manner, and if there are no foreign objects on the cap, the bevel of the cutter will ...
2026-06-19 00:13:05
|
|
2＂CT Coiled tubing pump opening joint Coiled Tubing Tools I. Overview: The pump opening joint is a tool connected to the end of the downhole string or ...
2024-12-09 13:27:49
|
|
Wireline Tool Trap Manual Wireline Pressure Control I. Product brief description: Anti-drop device, also known as the next catcher. It is a safety ...
2024-12-09 13:39:29
|
|
Tool Trap Wireline Pressure Control Equipment I. Product brief description: Anti-drop device, also known as the next catcher. It is a safety device to ...
2024-12-09 13:44:16
|
|
... falling into the well when the tool string is lifted out. It is installed below the blowout prevention pipe and above the blowout prevention valve...
2024-12-09 22:39:11
|
|
CT Coiled tubing Wireline Knuckle Joint 2 inch I. Overview: The coiled tubing Wireline Knuckle Joint is a tool that provides additional flexibility to ...
2024-12-09 22:39:11
|