141 - 150 of 193
api spec slickline tools
Selling leads
|
2.813 inch BO type selection positioning tool I. Overview: BO type selection positioning tool can choose any sliding sleeve to move and close SSD type ...
2024-12-09 13:42:53
|
|
GS Type Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 13:51:51
|
|
3 inch GS Type Pulling Tools Wireline Pulling Tool I. Introduction: A GS type pulling tool is used to pull inner fishing necks, which can cut off and ...
2024-12-09 17:08:26
|
|
... before running the downhole tool determines whether the downhole device can pass through the tubing and where in the tubing sits the joint. At the ...
2024-12-09 13:22:13
|
|
...Tool String Wireline Supported Roller Centralizer Wireline Tool String I.Overview The Supported Roller Centraliser is designed for use with ...
2024-12-09 13:22:13
|
|
...Slickline to the tool string, from wire sizes from 0.108”up to 0.160” Ⅱ. Features Assembly consists of a body with external fishing neck, sleeve ...
2024-12-09 13:22:13
|
|
2.25 Inch Wireline Swivel Joint Wireline Tool String Wireline Swivel Joint Wireline Tool String I.Introduction The Swivel Joint is a wireline ...
2024-12-09 13:31:30
|
|
1.25 inch SM Wireline Pulling Tool I. Introduction An S type pulling tool is an outer pulling tool, which can grasp the shoulder of the outer fishing ...
2024-12-09 13:42:17
|
|
Flat Bottomed Type GO Devil Wireline Fishing Tool I. Overview: The Flat Bottomed Type GO Devil is used to cut the stuck tool string wire. The Flat ...
2024-12-09 13:49:41
|
|
1.875 inch Wireline Swivel Joint Wireline Tool String I.Introduction The Wireline Swivel Joint is a wireline accessory used minimise the effect of ...
2024-12-09 13:22:13
|