11 - 20 of 49
5ft wireline stem bar
Selling leads
|
... created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices in the ...
2024-12-09 17:09:11
|
|
...Stem Bar 2ft Wireline Tool String I. Overview: The ordinary weight stem bar is used to provide the weight required for the operation, so that the ...
2024-12-09 13:42:17
|
|
... forces created by well pressure and the size of cable used and secondly it is the mass required to deliver impacts when setting or pulling devices ...
2024-12-09 13:36:45
|
|
GO Devil Cutter Bar type Wireline Fishing Tool I. Overview: The GO Devil Cutter Bar type is used to cut the stuck tool string wire. The GO Devil ...
2024-12-09 13:22:51
|
|
... against the differential pressure and friction at the surface pack-off or grease injection head or stuffing box assembly. The Mono-Conductor ...
2024-12-09 22:47:42
|
|
Wireline Roller Stem Wireline Tool String I.Introduction A wireline roller stem is designed to replace conventional stem for operation in deviated ...
2025-04-07 11:25:43
|
|
...ng the underside wall of the tubing. The use of rollers greatly reduces the friction that conventional stem would encounter. II.General Technical ...
2024-12-09 17:08:42
|
|
Wireline Slickline Tools Mechanical Spang Jar QLS 1.5inch～2.5inch Product overview The Mechanical Spang (Link)Jar are mainly used to cut the pins ...
2024-12-09 23:20:31
|
|
Tungsten Filled Stem Wireline Tool String Introduction A tungsten filled stem is designed to serve two purposes. It provides the weight required to ...
2025-04-07 11:25:38
|
|
2 inch tungsten Stem Wireline Tool String Ⅰ. Introduction The tungsten stem is with the advantage of superior weight. So the required weight can be ...
2025-04-07 11:25:42
|