231 - 240 of 297
3 inch wireline pulling tool
Selling leads
|
... of the cable pull to facilitate wire operation by the winch. It is different from the cable ground pulley in that its anti-hopping board length is ...
2024-12-09 22:39:11
|
|
Wireline Pressure Control Wireline Pulley I. Introduction: The Wireline Pulley is used to pull the steel wire or cable from the top of the nozzles to ...
2024-12-09 22:20:47
|
|
... has a wide range of sizes, can be connected with different tool strings, and is suitable for most wellheads. II. Common technical parameters: Size ...
2024-12-09 18:33:53
|
|
1.25 Inch Wireline Multi-Roller Knuckle Joint Wireline Tool String Ⅰ. Introduction The Roller Knuckle Joint is a wire tool attachment, which is used ...
2024-12-09 13:33:15
|
|
High Flexibility Wireline Knuckle Joint Wireline Tool String Wireline Knuckle Joint Wireline Tool String Ⅰ. Overview: The universal joint is a wire ...
2024-12-09 13:35:27
|
|
...end is connected to the anti-uplifting tool. When dropping the downhole tool, the lower joint of the hand-off tool is connected with the anti...
2024-12-09 13:34:00
|
|
2 inch 1.75inch Slip Rope Socket Wireline And Slickline Tools Material aluminum alloy I. Overview A slip rope socket is used to attach wireline to the ...
2024-12-09 13:36:45
|
|
... and angular offset provided by the Wireline Knuckle Joint can facilitate the operation when the hole is limited and the operation is in a branch ...
2024-12-09 22:39:11
|
|
... string and the lower end connected with the anti-upward movement tool. When putting in the downhole tool, the lower joint of the unlatching tool ...
2024-12-09 13:27:40
|
|
... O.D. should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface ...
2024-12-09 13:31:30
|