1 - 10 of 13
2 25 inch wireline lock mandrel
Selling leads
|
Wireline Lock Mandrel PXX plug and prong Running Tool 2.813 inch I.Product overview The Type “PX X” Plug is a positive plug used in conjunction with ...
2026-06-29 20:01:43
|
|
2.25 inch FB-2 Equalizing Check Valve Wireline Lock Mandrel I. Overview: FB-2 Equalizing Check Valve is actually a one-way plug, which can only ...
2024-12-09 22:39:11
|
|
...Inch XN Wireline Lock Mandrel Running Tool XN Lock Mandrel Wireline Running Tool I．Introduction An XN lock mandrel is used to install flow control ...
2024-12-09 13:49:50
|
|
...Inch X XN Wireline Lock Mandrel Running Tool X/XN Lock Mandrel Wireline Running Tool I．Introduction An X/XN lock mandrel is used to install flow ...
2024-12-09 13:22:23
|
|
3.75 inch FB-2 Equalizing Check Valve Wireline Lock Mandrel I. Overview: FB-2 Equalizing Check Valve is actually a one-way plug, which can only ...
2024-12-09 22:39:11
|
|
2.25 inch N-Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint ...
2024-12-09 22:47:42
|
|
...Mandrels, The X Line Running Tool is designed to deploy and set sub surface flow control devices equipped with X and XN lock mandrels, landing in ...
2024-12-09 13:22:23
|
|
1.875 inch Custom Slickline Wireline Running Tool R Running Tool Introduction An R running tool is a special tool used to run and set R/RN type lock ...
2024-12-09 13:40:21
|
|
1.5 inch Custom Slickline Wireline Running Tool X Running Tool Introduction An X running tool is a special tool used to run and set X/XN type lock ...
2024-12-09 13:46:53
|
|
2 Inch-1.25 Inch GS Pulling Tool Wireline Pulling Tool I. Introduction: (B) The GS type pulling tool is used to pull inner fishing necks, which can ...
2025-04-07 11:25:44
|