Relief Rehabitation Ice Compression Therapy Machine With Knee Cooling Wrap

Relief Rehabitation Ice Compression Cold Therapy Machine With Knee Cooling Wrap

Function

1. CRYOPUSH uses a non-motorized gravity system to provide cold compresses and local compression
Chilled water is delivered directly to the anatomically designed cryo/cuff to provide maximum cryotherapy and eliminate the risk of tissue damage. Of course, you can also choose to use an automatic air pump to adjust the air pressure of the ice pack to achieve the effect of your own circulation
2. The CRYOPUSH gravity cooler can hold the water and ice needed to provide 6 to 8 hours of cryotherapy; it is compatible with all Cryo/Cuff and Arctic Flow pads, and the wrapped ice pack is designed according to the body part, which can achieve better results .
3. It is very suitable for blood shrinkage, swelling, pain relief, postoperative recovery, trauma, rehabilitation and sports injuries. Moreover, it is very convenient to carry, small in size, and not restricted by the venue, allowing you to recover and treat your body anytime, anywhere.

Components:

Cuff: covers the affected body part(include 9 parts including head, shoulder, elbow, hand, wrist, back, knee, leg and ankle) with pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and cooler
Automatic Circulation System: make the water in the cooler flow into the cuff intermittently

Cryo Cuffs can be ordered alone, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.

Operation:

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.

to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.

2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.

3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.

4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.