Air Compression Cryotherapy Machine For Shoulder Pain Relief Electric Pump Unit

Air Compression Cryotherapy Machine For Shoulder Pain Relief Electric Pump Unit

Cold and compression therapy is used in a variety of situations to reduce swelling, prevent oedema, and help promote blood flow to injured areas. All of these benefits contribute to less pain, faster healing, and a quicker recovery process.

This Cold Compression Therapy Machine Equipement is compatible with shoulder cuff and 9 other wraps suiting different body parts. The cooler provides both gravity and motorized cold and compression therapy for flexibility of care. The optional pneumatic pump provides automated cold and compression therapy, with simplicity of design and ease-of- use operation.  No more ice packs or cold pads, this therapy machine will bring an increased coverage and better fit of affected areas, and a longer and consistant cold therapy with compression can been achieved. 

Benefit and feature:

1. The cold therapy system combines cold and compression therapy all in one

2. Two ways of operation available: gravity and motorized for flexibility of care

3. An Optional pneumatic pump provides automated compression and cyclically cold therapy

4. Main components are cooler and cuff,there are 10 different types for each body part
anatomically designed to completely fit the body providing maximum cryotherapy

5. Safe operation: Deflation will be automatically activated when compression inside of the cooler is above 150mmHg

5. Simplicity of design and ease of operation makes it ideal for post-operative recovery, trauma, athletic training rooms and home use

Components:

All Cryo/Cuffs can be ordered as a single cuff, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.
Cuff: covers the body part(include 9 parts,such as the head, shoulder, elbow, hand and wrist, back, knee, leg, ankle) with pressured ice water
Cooler: High:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy
Tube: exchanges the water between cuff and the cooler
Automatic Circulation System: make the water in the cooler flow into the cuff intermittently

Operation:

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.

to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.

2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.

3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.

4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.