Embedded Quick Field Assembly FTTH SC Fast Connectors Fiber Optic
Rapido Conector
Description
UT-King Fiber Optic fast Connector field-installable
connectors are factory pre-polished connectors that completely
eliminate the need for hand polishing in the field. Proven
mechanical splice technology ensuring precision fiber alignment, a
factory pre-cleaved fiber stub and a proprietary index-matching gel
combine to offer an immediate low loss termination to either
single-mode or multimode optical fibers.
UT-King's fast Connector connectors are compatible with 250 µm and
900 µm optical fibers, as well as 900 µm, 2 mm and 3 mm cordage.
All primary fiber types are supported, and each connector is color
coded per industry-standard requirements to aide in identification
during and after installation. A factory-installed wedge clip
(included with each connector) is removed and discarded upon
completion of the termination. Incorporated into this device is an
innovative, translucent wedge enabling the use of a common VFI to
provide a “pass/fail” signal once physical contact is achieved.
Features
- High Temperature Stability
- Good Exchangeability
- Good Durability
- Low Insertion Loss
- High Back Reflection Loss
Applications
- Premise environments
- Connections at the desk for LAN environments
- Patch panels
- Direct equipment termination
- Fiber to the Subscriber (FTTx) applications
- Repair and replacement requirements
- Equipment test leads
Specification
Embedded Quick Field Assembly FTTH SC Fast Connectors Fiber Optic
Rapido Conector |
| Mode | SM | | MM |
| Polish | UPC | APC | PC |
| Insertion Loss | Typical ≤0.2dB Maximum ≤0.3dB | ≤0.25dB |
|
| Return Loss | ≥50dB | ≥65dB | ≥35dB |
| Interchangeability | ≤0.2dB |
| Repeatability | ≤0.1dB |
| Durability | ≤0.2dB (1000 times mating) |
| Tensile Strengh | > 10kg |
| Temperature | ≤0.2dB (-40+85 sustain 100 hours) |
| Humidity | ≤0.2dB (+25+65 93 R.H.100 hours) |
