Extensive Accuracy 144m3/H PCBA Dust Collector PCB Cleaning Machine
Extensive Accuracy PCB Circuit Board Upper Dust Collector for PCB
Separator
PCBA Dust Collector Features
| Has powerful capability of absorbing dust from the upper side. |
| Equipped with air outlet switching device to increase dust
collecting air volume. |
| High efficiency motor and fan, low noise, set |
| Dust efficiency is good. |
| Straight barrel filter bag, dust after cutting and |
| The debris was collected centrally after being beaten |
PCBA Dust Collector Specifications
| ITEM | TS300 |
|---|
| Power supply | AC 380V/(220V)50/60 Hz 3 Phase |
| Output power | 3KW(4HP) |
| Air-intake flow volume | 144m3/h |
| Air-intake speed | 20m/s |
| Air-intake caliber | D 50mm |
| Air-vent caliber | D 125mm |
| Filter tube's material | Polyester |
| Filter bag's grade | HEPA |
| Filter tube's size | 710*950mm |
| Collector's capacity | 50L |
|
| Dynamo protection grade | IP54 |
| Noise | <76db |
| Weight | 110kg |
| Dimensions(W*D*H) | 1051*538*969mm |
PCBA Dust Collector Advantage:
1. the upper collection of dust suction port is concentrated in one
point, the suction is more concentrated, can prevent the dust from
spreading to the workshop environment pollution, at the same time
to prevent the employee occupational disease;
2. There is no need to do secondary dust removal to ensure the
yield of the product and save manpower.
PCBA Dust Collector Disadvantage:
1, dust from the upper suction will be easier to enter the spindle,
will speed up the loss of the spindle;
2, the consumption of milling cutter will be more than the next
dust collection structure (not like the next dust collection
milling cutter application segment used four to five times);
