0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

Browse Categories

MINGCHENG GROUP LIMITED

City: dongguan

Province/State:guangdong

Country/Region:china

Tel:86-769-82693920

Contact Person:
Ms.Julie View Contact Details

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

Brand Name	MC Silicone
Model Number	MCPLA-L00
Certification	MSDS
Place of Origin	CHINA
Minimum Order Quantity	120kg
Price	USD 6.15~7.88 KG
Payment Terms	L/C, D/P, T/T, Western Union
Supply Ability	4000KG PER DAY
Delivery Time	5-10 working days after payment
Packaging Details	20kg/drum；200kg/drum
HS code	3910000000
Color	Translucent silicone rubber
Mix ratio	1:1
Mixed Viscosity	4000-6000 cps
Working time	30~40 minutes
Curing time	4~6 hours
Hardness	0 shore A
Tensile strength	3.0-3.2 Mpa
Tear strength	12-14 N/mm
Elongation	630-650%
shrinkage	≤0.1%
Shelf life	12 months

Detailed Product Description

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

Product description of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

Two-component addition type silicone rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a Shore A 0~55 rubber. The polymerization can be accelerated by heat. The silicone components are delivered as liquids,which once mixed and cured transform into a transparent, elastic and resistant material. Polymerization occurs without formation of heat.

Features of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold
Outstanding release properties
Cure can be heat accelerated
High transparent appearance to cut split lines
Very low shrinkage and good dimensional stability
High hardness, but flexible and very tough
Can be used for high temperature casting applications

Applications of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold
1. A range of materials can be cast into the cured silicone mold:
polyurethane and other reactive resins
Small pieces of cement,plaster,concrete products.
Food like chocolate,fondants
Wax,candle,soap;
Low melt metal

2. Label manufacturing, toys, jewelry, automotive, rapid prototyping etc.

Technical Data of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

Item No.	MCPLA-L00
Color	Translucent/can be customized
Curing Agent	C520
Mixing ratio	1:1
Mixed Viscosity	4000-6000 cps
Working time	30-40 mins
Curing time	4-6 hours
Hardness	0 shore A
Tear Strength	12-14 N/mm
Tensile Strength	3.0-3.2 Mpa
Shrinkage	≤0.1%
Elongation	630-650%

Processing and Instructions of Addition Cure Silicones

1. Mixing the two components
According the mixing ration 1:1 weighting A and B, the two components may be thoroughly mixed either by hand or using a low-speed electric to minimize the degassing of bubbles and to avoid any temperature increase.
Note: It is also possible to use a special mixing and dispensing machine for the silicone components, further information is available upon request.

2. Moulding
The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3-4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure.

Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter/height ratio (3 to 4 times of the initial volume)

3. Polymerisation
The curing may be slowed down at lower temperature or accelerated by applying heat.
Note:
1. Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.
2. Apply a release agent, Although not usually necessary, a release agent will make demolding easier when casting into most surfaces.

Packaging of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

1kg=504kg pallet, 5kg/drum=600kg/pallet, 10kg, 20kg per plastic drum=480kg per pallet
200kg per drum, 800kg per pallet. Other types of package, please check with our sales representative.

Storage and shelf life of 0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

When the silicone rubber is stored at or below 25 degree Celsius in the original unopened containers, Silicone Base and Curing agent have a usable life of 12 months from the date of production. After 12 months’ stockpiles, please use tool to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

1. Store the original packing tightly sealed and at a temperature below 25 degree Celsius.Use the product as soon as the packaging has been opened.
2. Close the lid tightly after taking out the proper amount of liquid silicone rubber.
Use the product as soon as the packaging has been opened.

Product Tags: Cream-pointed Silicone Mold Rubber Platinum Silicone Mold Rubber 0 Shore A Silicone Mold Rubber

Related Products

High Viscosity Platinum Silicone Rubber For Angel Wings Silicone Mold Viscosity 7000-9000 cps Mix ratio 1 1 for sale


From:	Enter your Email please. Your email is incorrect!
To:	MINGCHENG GROUP LIMITED
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

High Viscosity Platinum Silicone Rubber For Angel Wings Silicone Mold Viscosity 7000-9000 cps Mix ratio 1 1

Platinum Silicone Rubber For Mermaid Tail Sugar Art Cake Decoration Silicone Mold

Translucent Platinum Silicone Rubber For Starfish Shell Resin Silicone Mold

0 Shore A Platinum Silicone Rubber For Cream-pointed Silicone Mold

10 Shore A Platinum Silicone Rubber for Rose Resin Silicone Mold 30-40 Minutes Working Time 3.8-4.0 Mpa Tensile Strength

10 Shore A Platinum Silicone Rubber for Rose Silicone Mold High Tear Strength 15-17 N/mm and Viscosity 7000-9000 cps