101 - 110 of 778
patient monitor temperature connector cable
Selling leads
|
... and electromagnetic valve, are located on the bracket of the multi-parameter module, which is fixed to the rear housing with 4 screws. The multi...
2024-12-09 18:05:06
|
|
...Connector Cable PHiliphh Goldway CTG7 Fetal/Meternal Monitor Encoder C-CODE011D with Connector Cable Used Part ► Brief Description Encoder C...
2026-05-14 15:36:00
|
|
... monitor, specifically designed to connect the device's motherboard and paper sensor board. It uses medical-grade multi-core shielded cable ...
2026-03-03 07:30:17
|
|
...e is plugged into the USB module interface and the other side is plugged into the motherboard. It is mainly used to connect the USB module to the ...
2025-04-09 13:31:21
|
|
...front and rear units from the cabinet. Separating the front and back of the case: Unplug the power cord from the back of the monitor. Remove the ...
2025-01-06 16:42:29
|
|
... cable used for connecting the display module of the PHiliphh Goldway UT6000A patient monitor to the power supply. It transmits both the display ...
2025-01-06 16:44:24
|
|
... T8 Super Patient Monitor Network Video USB Connector Assembly is an essential component of the patient monitoring system. This component allows ...
2024-12-10 00:14:11
|
|
... and up to three waveforms. When the MP5 is connected to a host monitor (complementary mode is displayed on the MP5 screen), only data from the MP5 ...
2025-01-06 16:44:04
|
|
...n when AC power supply is interrupted. The battery recharges whenever the monitor is connected to the AC power source. During monitoring, if the AC ...
2025-01-06 16:42:31
|
|
Patient Monitor parts COMEN C60 Patient Monitor WAKE Module Connector In good working condition COMEN C60 Patient Monitor WAKE Module Connector ► ...
2024-12-09 18:36:09
|