Comen C60 Patient Monitor Touchscreen Display Assembly XWT1590 B XWT656 20298

Comen C60 Patient Monitor Touchscreen Display Assembly XWT1590 B XWT656 20298

Introduction

This product is a genuine, original OEM touchscreen display assembly designed specifically for the C60 patient monitor. Featuring a high-brightness, LED-backlit TFT-LCD panel with an 8.4-inch diagonal size, the display renders vital sign waveforms, numerical parameters, and alarm statuses clearly and vividly under a wide range of clinical lighting conditions. The screen utilizes either resistive or capacitive touch technology (depending on the specific OEM configuration), offering high touch sensitivity and supporting handwriting, Pinyin, and English input methods to facilitate the quick and convenient entry of patient information. Integrated into a sleek and stylish front panel assembly, the screen surface features scratch-resistant and chemical-resistant treatments, enabling it to withstand repeated cleaning with hospital-grade disinfectants.

Features

• Compatible Model: Comen C60 Patient Monitor
• Product Number:XWT1590 B XWT656 20298
• Panel Type: 4-Wire Resistive Touchscreen
• Compatible Size: Precisely matches the dimensions of the original C60 display screen
• Interface Type: FPC Flexible Ribbon Cable Interface with foolproof positioning design
• Touch Accuracy: Highly responsive, precise positioning, and free from drift or deviation
• Structural Materials: High transparency ITO conductive glass + scratch-resistant protective layer
• Operating Environment: Temperature 0–40°C, Relative Humidity 10–85%; suitable for standard medical equipment operating conditions
• Key Features: Supports operation via finger or medical gloves; surface is easy to clean and disinfect; splash-resistant

Disassembly Steps

1. Turn off the power to the Comen C60 monitor, disconnect the power cord and all external probes, and place the device securely on an anti-static workbench while ensuring proper anti-static precautions are observed.

2. Remove the device's front bezel to access the touchscreen attached to the front of the display panel. Gently lift the double-sided adhesive along the edges, then slowly peel the touchscreen away from the display panel, taking care not to scratch the underlying screen.

3. Locate the FPC ribbon cable connector at the end of the touchscreen. Pinch the latches on both sides of the connector to release it, then steadily pull the ribbon cable free (strictly avoid pulling directly on the cable itself) to remove the old touchscreen.