Biocare IM12 monitor parameter board assembly includes a SpO2 board PN 02049127

1. Multi-parameter Integrated Processing: As the core parameter processing module of the Biocare IM12, it is responsible for the acquisition, amplification, filtering, and conversion of key vital signs signals such as SpO2, ECG, NIBP, and Resp, providing rich data references for clinical diagnosis.

2. Integrated SpO2 Board: Includes a dedicated SpO2 board to ensure the accuracy and stability of blood oxygen saturation measurement.

3. Strong Anti-interference: Employing a multi-layer PCB layout and shielding design, it effectively suppresses electromagnetic interference, ensuring that the signal acquisition process is unaffected by electromagnetic interference and guaranteeing accurate and reliable data acquisition.

4. Ease of Maintenance The integrated assembly design simplifies the maintenance process, allowing for simultaneous purchase of all components. Replacing the parameter panel can resolve multiple issues simultaneously, such as abnormal multi-parameter acquisition and SpO2 failure, reducing maintenance costs and downtime.

Q1: What if there is no SpO2 reading or significant fluctuations after replacing the parameter panel?

A1: Check if the SpO2 probe and interface connection is loose; clean the probe finger clip contact area with the skin; ensure the parameter panel and mainboard connector are firmly inserted, and recalibrate if necessary.

Q2: What if there is severe ECG signal interference or no waveform?

A2: Check if the electrode pads are properly attached, and replace the electrode pads; check for damaged leads; test the ECG input circuit of the parameter panel, and replace the entire assembly if necessary.

Q3: What precautions should be taken when installing the parameter panel?

A3: The following points should be noted:

1. Ensure all connection cables for the parameter panel are properly connected.

2. Pay attention to the tightness of the parameter panel fixing screws during installation; avoid overtightening or loosening, just tighten appropriately.

3. After replacing the parameter board, test it by powering it on first. Only reinstall the casing after everything is normal to avoid repeated disassembly and reassembly if there are any problems.